Impact Driver vs Drill: Which One Do YOU Need?

Quick Answer: Short answer: a drill drills holes; an impact driver drives screws. If you only buy one, buy the drill — it does about 80% of impact-driver jobs plus all the drilling an impact driver can't do. Add the impact driver second, or buy the combo kit.

Stand in the tool aisle long enough and two lookalike tools will start whispering to you. Same grip, same trigger, same confident stance — and a price gap small enough to make you grab whichever one feels luckier. That coin flip costs people real money: the wrong twin strips screws, wrecks wrists, and leaves you staring at a hole you simply cannot drill.

The good news is the difference takes about thirty seconds to learn and a lifetime to benefit from. One of these tools is a hole-making all-rounder; the other is a screw-driving specialist with a tiny hammer hidden inside. This guide shows you which is which, when each one earns its keep, and the single buying mistake that turns a bargain into a regret.

Cordless impact driver and drill-driver side by side driving screws into wood
Impact driver vs drill-driver: a screw-driving specialist vs the all-rounder that drills every hole.

Related reading: DeWalt vs Milwaukee Impact Driver: Which Is Better?

The core difference (in 30 seconds)

Drill / Drill-DriverImpact Driver
ChuckAdjustable (1/2″ or 3/8″) — holds any bit1/4″ hex quick-change — bits only
MechanismSteady rotationRotation + rapid impacts (hammering twists)
Best atDrilling holesDriving screws and bolts
TorqueModerate, constantHigh, pulsed
ClutchYes (adjustable)Usually no (rely on trigger control)
If you buy oneBuy this firstBuy second

The one-sentence version: a drill is a versatile hole-maker that can drive screws; an impact driver is a screw-driving specialist that hits like a hammer while it turns.

How each tool actually works

The drill: steady and precise

A drill spins its chuck at a constant speed. You control speed with the trigger and torque with the adjustable clutch (those numbered settings around the chuck). The clutch slips when resistance exceeds the setting — which is how you avoid stripping screws or snapping small bits. Drills excel at controlled, precise work: pilot holes, small fasteners, delicate materials.

The impact driver: rotation plus concussive force

An impact driver adds a hammering mechanism in the rotational direction — tiny internal hammers strike the anvil thousands of times per minute (measured in IPM: impacts per minute), delivering pulsing bursts of torque. This is completely different from a hammer drill (which hammers forward for masonry).

The genius of the impact mechanism: when resistance increases, the impacts kick in automatically. The pulsing action also means almost no reactive torque twists your wrist — the tool absorbs it internally. That’s why you can drive a 6″ lag bolt one-handed with an impact driver but would need two hands and a prayer with a drill.

When to use a drill

  • Drilling holes — any size, any material (with the right bit): wood, metal, plastic
  • Small screws and delicate work — the clutch gives precise control
  • Mixed materials — pilot holes, then driving, without switching tools
  • Hole saws and spade bits — large-diameter drilling
  • Wire brushing, mixing paint, stirring — specialty attachments need a chuck
  • Masonry (with a hammer drill variant) — impact drivers can’t do this
Close-up of gloved hands driving a long wood screw into a thick wooden beam with an impact driver, wood shavings flying
Photo: Tool Worth Lab

When to use an impact driver

  • Driving long screws — deck screws, structural screws, lag bolts
  • Lots of screws — dozens or hundreds (fencing, decking, subfloor)
  • Tightening nuts and bolts — with socket adapters
  • Stubborn/rusted fasteners — impacts break them free without cam-out
  • Overhead work — compact size and low wrist strain
  • Anytime your drill is struggling — if the drill strains, the impact driver won’t

The tasks where it doesn’t matter (much)

For light work — driving a few short screws into softwood, assembling flat-pack furniture — both tools do the job fine. The differences emerge with volume and difficulty: 5 screws, whatever; 200 screws into hardwood, impact driver by a mile.

Do you need both?

The honest answer for most people: eventually, yes. Here’s the typical journey:

  1. Start with a drill. It’s the versatile foundation — holes plus light fastening. Most drill kits are sold as the first tool for good reason.
  2. Add an impact driver when you start a project with serious screw-driving: a deck, a fence, a shed, subfloor, or any renovation. You’ll wonder how you lived without it.
  3. They’re usually sold as a combo kit — drill + impact driver + 2 batteries + charger + bag, often for barely more than the drill kit alone. If you’re buying your first tools, the combo kit is almost always the best value.

If you truly only buy one: the drill. It does 80% of what an impact driver does (slowly, with more effort) plus all the drilling an impact driver can’t do.

Keep This Chart Handy — The One-Tool Challenge: What You Give Up

Thinking of buying just one? Fair enough — but go in with your eyes open. This chart shows what each lonely tool costs you, using only the trade-offs already in this guide. Each row stands alone — no other section needed.

If you own ONLY thisWhat you give upWhen it will hurt most
Only a drillSpeed and comfort on heavy fastening: no pulsing impacts, so long screws and lag bolts take more effort, more wrist strain, and more stripped heads.Driving dozens to hundreds of screws — a deck, fence, shed, or subfloor. The guide’s rule of thumb: 5 screws, whatever; 200 screws into hardwood, the impact driver wins by a mile.
Only a drillNothing on drilling — but you still lack the impact driver’s near-zero reactive torque on stubborn or rusted fasteners.Breaking free a rusted bolt, or driving a 6 in (15 cm) lag bolt one-handed overhead.
Only an impact driverAll proper drilling: it takes only 1/4 in (6.35 mm) hex-shank bits, so no hole saws, no spade bits, and no large-diameter holes.Any project that starts with a hole — pilot holes, large-diameter drilling, wire brushing, or mixing paint with a chuck attachment.
Only an impact driverDelicate control: usually no adjustable clutch, so it will snap or strip small screws and delicate fasteners.Flat-pack furniture, small screws, and any work where the clutch’s slip is what saves the screw.
Only an impact driverMasonry work entirely: it is not a hammer drill, which punches forward for masonry holes — the impact driver only adds rotational impacts.Drilling into brick or concrete, where only a hammer-drill variant will do.
Only an impact driverBit freedom: standard round-shank bits do not fit, and non-impact-rated bits can shatter under the pulsing action.Any day you reach for a favourite old bit and find it has the wrong shank — or worse, the wrong rating.
Either tool aloneThe combo-kit value: a drill plus impact driver kit typically costs only slightly more than the drill kit alone, and both tools share the same battery platform.The day you buy the second tool separately and realise the kit would have given you two batteries, a charger, and a bag for barely more.

Bottom line, as the guide says: if you truly buy only one, buy the drill — it covers about 80% of impact-driver jobs plus all the drilling an impact driver cannot do. Then add the impact driver the moment screws become your life.

What They Share (Yes, Really)

For all the “vs” in this article, a drill and an impact driver are closer cousins than the debate suggests:

  • Both run on the same battery platform. A DeWalt 20V Max drill and a DeWalt 20V Max impact driver drink from the same batteries — which is exactly why two-tool kits are such a good deal.
  • Both are one-handed, variable-speed tools with forward and reverse. The controls feel identical in your hand; only the business end differs.
  • Both are beginner-friendly. No special skill needed to start — though the impact driver’s violent rattle scares first-timers. It’s normal; there’s a whole FAQ answer about it below.
  • Both have real limits. Neither replaces a hand screwdriver for delicate work, and neither replaces a socket wrench for serious torque. They’re the middle of the fastening world, not the top of it.
  • Both change bits fast with no tools. Drills take any round-shank bit in a keyless chuck; impact drivers use 1/4-inch hex shanks — but hex-shank drill bits exist, so the gap is smaller than it looks.

That overlap is exactly why so many people end up owning both: they feel familiar in the hand, while the differences covered above make each one earn its spot.

Keep This Chart Handy: Impact Driver or Drill for YOUR Job?

Your situationGrab thisWhy
Buying your first power toolDrillDrills holes plus light fastening — it does ~80% of impact-driver jobs plus all the drilling an impact driver can’t do.
Building a deck, fence, or shed — dozens to hundreds of screwsImpact driverPulsing torque with almost no wrist strain; 200 screws into hardwood is its happy place.
Assembling flat-pack furniture — a few short screwsEitherLight work like this; the differences don’t matter at this scale.
Drilling holes — wood, metal, hole saws, spade bitsDrillImpact drivers only take 1/4″ hex-shank bits — no hole saws, no large bits.
Long screws, lag bolts, rusted fastenersImpact driverImpacts kick in automatically under resistance; breaks bolts free without cam-out.
Overhead workImpact driverCompact and light, with almost no reactive torque twisting your wrist.

Can an impact driver drill holes?

Sort of — with hex-shank drill bits, an impact driver can drill perfectly good holes in wood and light metal. But:

  • Bit selection is limited (hex shank only, no hole saws or large bits)
  • No clutch means less control — easy to snap small bits
  • Less precise for delicate work

It works in a pinch, but it’s not a drill replacement. (And a drill can drive screws — it just does it slower, with more wrist strain and more stripped heads.)

Common mistakes

MistakeWhy it’s wrong
Using an impact driver for delicate screwsNo clutch — you’ll snap or strip them
Using a drill for 100+ deck screwsExhausting, slow, stripped heads
Buying the impact driver firstCan’t drill proper holes — limited versatility
Using non-impact bits in an impact driverThey can shatter — always use impact-rated bits
Thinking “hammer drill” = “impact driver”Completely different: hammer drills punch forward for masonry

The bit warning matters: standard drill bits can shatter in an impact driver’s violent pulsing action. Always use bits labeled “impact rated” in the impact driver. (Impact-rated bits are also excellent in drills — tougher steel all around.)

Impact driver vs drill vs hammer drill (the full picture)

DrillImpact DriverHammer Drill
Primary jobHolesScrews/boltsMasonry holes
ActionRotationRotation + rotational impactsRotation + forward hammering
ChuckAdjustable1/4″ hexAdjustable (SDS on rotary hammers)
ClutchYesUsually noYes

Three tools, three jobs. The drill and impact driver are the everyday pair; the hammer drill is the masonry specialist.

Can I just use my drill as an impact driver?

For light screw driving, yes — that’s what the clutch is for. But for heavy or high-volume fastening, a drill is slower, harder on your wrist, and strips more screws. The impact driver exists because drills are bad at this specific job.

Which should I buy first?

The drill — no contest. It’s more versatile. Add the impact driver second (or buy the combo kit upfront, which is usually the best deal).

Are combo kits worth it?

Almost always. A drill + impact driver combo kit typically costs only slightly more than the drill kit alone, and you get two batteries and a charger. It’s the best value in power tools.

Why does my impact driver sound so violent?

That’s the impact mechanism — thousands of tiny hammer strikes per minute. It’s supposed to sound like that. Wear hearing protection for extended use.

Can an impact driver replace my socket wrench?

For many jobs, yes — with hex-shank socket adapters, an impact driver handles nuts and bolts beautifully. For precise torque (engine work, etc.), use a torque wrench.

Do I need impact-rated bits?

In the impact driver: absolutely, yes — regular bits can shatter. In the drill: not required, but impact-rated bits are tougher and last longer anyway.

Print This Before You Buy — The Drill and Impact Driver Buying Checklist

Check every row before spending money. Each row stands alone — no other section needed.

Buying checkThe rule
First tool to buyBuy the drill first. It drills holes plus handles light fastening, covering about 80% of impact-driver jobs plus all the drilling an impact driver cannot do.
When to add the second toolAdd an impact driver when a project involves serious screw-driving: a deck, a fence, a shed, subfloor, or any renovation with dozens to hundreds of screws.
Best value purchaseA drill plus impact driver combo kit — drill, impact driver, 2 batteries, charger, and bag — typically costs only slightly more than the drill kit alone, and both tools run on the same battery platform.
Bit and chuck checkDrills take any round-shank bit in a keyless chuck; impact drivers use 1/4 in (6.35 mm) hex shanks. In an impact driver, always use bits labelled impact-rated — standard bits can shatter under the pulsing action. Impact-rated bits also work well in drills.
Delicate-work checkNeither tool replaces a hand screwdriver for delicate work, and neither replaces a socket wrench for serious torque. An impact driver has usually no clutch, so it will snap or strip delicate screws.
Name-confusion checkA hammer drill is not an impact driver. A hammer drill punches forward for masonry holes; an impact driver adds rotational impacts for screws and bolts. Only a hammer-drill variant handles masonry.
Noise checkAn impact driver’s violent rattle is normal — thousands of tiny hammer strikes per minute. Wear hearing protection for extended use.

The verdict

Your situationGet this
Buying your very first toolDrill (or drill + impact driver combo kit)
Lots of screws ahead (deck, fence, renovation)Add an impact driver — you won’t regret it
Only light DIYDrill alone is fine
Best value purchaseCombo kit — both tools, barely more than one
Driving big bolts/lags regularlyImpact driver (or step up to an impact wrench)

The drill is the all-rounder; the impact driver is the specialist that makes hard fastening feel easy. Start with the drill, add the impact driver when screws become your life, and enjoy the moment you realize what you’ve been missing. Every experienced DIYer remembers their first impact driver the way drivers remember their first car.


Related: For a concrete example of a classic drill/driver, see our honest DeWalt DCD771C2 review — it is the kit half the garages in America started with.

Tool Worth Lab provides research-based buying guidance. Specs and prices are approximate and change over time.

For official specifications and support documentation, see DeWalt’s official site.

For official specifications, see Milwaukee’s official site.

Bookmark This Checklist — The Starter Kit to Buy With Each Tool

The tool is only half the purchase — the bits and extras decide whether it actually does the job. Each row stands alone; no other section needed.

Buying withGet thisWhy
The drillAny round-shank bit in the keyless chuck.The adjustable chuck holds any bit, so the drill takes hole saws, spade bits, and large-diameter drilling the impact driver cannot touch.
The drillHole saws and spade bits for big holes.Large-diameter drilling is drill-only work — the impact driver takes just 1/4 in (6.35 mm) hex-shank bits and no hole saws at all.
The drillWire-brushing and paint-mixing attachments.These specialty attachments need a chuck, so they only work on the drill.
The impact driver1/4 in (6.35 mm) hex-shank bits only.Standard round-shank bits simply do not fit the impact driver’s quick-change chuck.
The impact driverBits labelled impact-rated.Standard bits can shatter under the pulsing action. Impact-rated bits are tougher steel and also work well in drills.
The impact driverHex-shank socket adapters.With adapters, the impact driver handles nuts and bolts beautifully — it is the closest thing to a socket wrench in your drill kit.
Either toolHearing protection for extended use.The impact driver’s violent rattle is normal — thousands of tiny hammer strikes per minute — but your ears still deserve a break.
Both toolsOne battery platform, ideally a combo kit.A drill plus impact driver kit typically costs only slightly more than the drill kit alone, and both tools share the same batteries, charger, and bag.

Keep Reading

If this one helped, these are worth your time next:

4 thoughts on “Impact Driver vs Drill: Which One Do YOU Need?”

  1. Pingback: Why Does My Drill Keep Stripping Screws? (Causes & Fixes) - Tool Worth Lab

  2. Pingback: Impact Wrench vs Impact Driver: What's the Difference? - Tool Worth Lab

  3. Pingback: Why Does My Drill Smell Like Burning? (Causes & Fixes) - Tool Worth Lab

  4. Pingback: 10 Essential Power Tools Every Beginner Should Own (2026) - Tool Worth Lab

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top